Carl's Place Curved Golf Enclosure Kit with Impact Screen

The Curved kit angles its side walls back so the impact screen wraps gently around the hitting area. That wraparound fills more of your peripheral vision, adding depth and realism a flat screen cannot, while using the same triple-layer impact screen as our flat enclosures.

Each kit includes the triple-layer impact screen in your chosen material, the BlackStop™ ceiling and wall panels, steel fittings and elbows for all frame joints and corners, foam inserts to protect the frame from shanked shots, and all necessary zip ties, with detailed assembly instructions (made in the USA). The 2-inch EMT frame pipe is supplied by you or added as an optional Pipe Framing Kit.

There are 18 size configurations: 14 to 17 feet wide, 8 to 15 feet deep, in 9, 9.5, and 10-foot heights. Each size is also offered with either the Premium or High-Contrast Gray screen, so you can match the kit to your exact room.

Both are triple-layer impact screens. The Premium screen is the standard bright-white surface; the High-Contrast Gray Premium Golf Screen adds image depth and clarity in brighter, well-lit rooms by deepening blacks and reducing washout. Gray only pays off if the projector is bright enough to drive it. Carl's puts a 4,000-lumen projector like the BenQ AK700ST on the borderline, so plan for 4,000 lumens or more. In a room you can darken, the white screen gives the better image.

Plan for the size you choose plus clearance behind the hitting area for the curved side walls. The smallest footprint is 14 feet wide by 8 feet deep at 9 feet tall; deeper rooms produce a fuller wraparound. See our golf simulator room size guide for minimum swing and ceiling clearances.

The kit is built around a 2-inch EMT steel pipe frame. Sourcing the pipe locally is the cheaper route, because Carl's does not cut the curved pipes down and the Pipe Framing Kit ships by freight. Add the kit if you would rather have every length pre-measured. The steel corner fittings, zip ties, and instructions are always included.

Yes. The Curved enclosure is designed for DIY installation and ships with detailed instructions. Most builders complete assembly with basic hand tools in about four hours. No contractor and no proprietary hardware required.

The Curved kit is the enclosure and screen. To finish a full bay you add a launch monitor, a short-throw projector, a hitting mat, and a PC or tablet to run your sim software. Our team can help you match compatible components to your room.

For the safety of both the golfer and the screen, the manufacturer recommends standing a minimum of 10 to 12 ft from the screen. This distance also helps prevent premature wear on the material.

Time, tension and gravity remove most wrinkles on their own within a couple of days. To speed that up, Carl's Place says you can use a clothes iron on a very low setting on the backside of the screen, or a hand steamer, being careful not to leave water spots.

Use new golf balls free of scuffs, grass stains, or marker, and keep your clubs clean. Protect the edges and grommets from direct strikes. Impact screens are wearable products and may show wear early with heavy use, but they are built to withstand many thousands of strikes over their life.

Yes. Affirm financing is available at checkout, so you can spread the cost of your enclosure and simulator build into fixed monthly payments. Choose Affirm at checkout to see your options.

Carl's Place screens and enclosure materials are wearable goods, so they do not carry a warranty. Some marking and wear from the first sessions is normal, and how long a screen lasts depends on skill level, how often you play and how it is installed. If something looks unusual rather than like normal wear, send us photos and your order number and we will take it up with Carl's Place. All impact screen sales are final with no returns. Because fit and material choice matter, measure your space and pick your screen carefully before ordering, or call us at 1-888-871-6110 and we will help you choose.